|
|
 |
 Melt Pressure Transducers and Transmitters From Skylark are available in two unique designs:
-
The CYR is the classic style of Melt Pressure Transducer most often found on today's extrusion processing machinery.
-
The CYRR is the original style of Melt Pressure Transducer, offering the same specifications as the CYR style without the flex armor.
General Purpose Melt Pressure Transducers
are our most popular series featuring better than .5% accuracy.
General Purpose Melt Pressure Transducers From Skylark incorporate a liquid filled capillary design. This tried and proven design provides an electronic signal which is proportional to the measured pressure, and allows the transducer to operate at process temperatures up to 750ºF or 400ºC. The electronics of each transducer are a Wheatstone Bridge -Bonded Strain Gage design, insuring high accuracy, reliablilty, and repeatability.
All General Purpose Melt Pressure Transducers From Skylark are fully compatible with the industry standard wiring pattern and color coding, as well as offering 100% mechanical compatibility with existing Melt Pressure Transducers utilizing the 6 Pin Bayonet connector. There is seldom a need to re-wire when installing Skylark Melt Pressure Transducers.
With 100% form, fit, and functionality, at the most competitive prices, General Purpose Melt Pressure Transducers From Skylark are rapidly becoming the preferred choice of cost conscious Plastics Processors throughout the globe.
General Purpose Melt Pressure Transducers From Skylark offer high accuracy, repeatability, industry standard functionality, at prices substantially below the competitors.
Features:
-
Global Leader in price/performance, quality, and delivery
-
6 Pin Bayonet Connector – Industry Standard Design – Compatible Color Coding
-
80% Output Calibration – Industry Standard
-
Fully interchangeable with competitors models without re-wiring – 100% Field Compatibility
-
General Purpose Grade Featuring .5% accuracy
General Specifications:
Mechanical Specifications:
-
Pressure Ranges: 0-3,000 psi to 0-15,000 psi, Metric ranges are available
-
Mounting: ½- 20 UNF thread, M18 X1.5 available
-
Mounting Torque: 500 inch pounds maximum, (150 inch pounds recommended)
-
Diaphragm Material: 15-5PH Stainless Steel
-
Overload Capacity: 2 times FSO (full scale output)
-
Temperature Ratings: Diaphragm 750ºF, Electronics 225ºF
-
Accuracy: Non-Linearity better than .5% FSO
-
Repeatability: Better than .15% FSO
Electrical Specifications:
-
Type: Bonded Strain Gage, 4 Leg Wheatstone Bridge
-
Bridge Resistance: 350 ohm +/- 5%
-
Output: 3.3mV/Volt, 4-20 mA or 0-10 Vdc are available
-
Excitation Voltage: 10Vdc Recommended
-
Internal Calibration: 80% of Full Scale Output
-
Insulation Resistance: 1,000 Mohms @ 50Vdc
-
|
|
|
CYR Style With
Thermocouple Option
|
Temperature Output: Type “J”,
Type “K” Thermocouple available
-
Mounting: ½ - 20 UNF,
M18 X 1.5 available
-
Rigid Stem Length: 6"
3" and 12" Rigid Stem Lengths are available
-
Flex Armor Length: 18",
lengths to 36" available
-
Calibration Certificate: NIST traceable calibration certificate available
|
|
|
