|
|
 |
 |
Accurate Industrial Temperature Calibration made easy up to –50ºC
(-122ºF) to 650ºC (1200ºF).
Temperature Calibrators Spec Sheet
|
| |
- Safe, dry calibration
- Accurate from ±0.3ºC (0.6ºF)
- RS-232 interface is standard
- Carrying case, test cable, and inserts are included
- Highly portable, measuring only 9 x 6 x 10 inches and weighing only 15 lbs.
- Easy-to-use 2-button operation
- Temperature ranges from –50ºC (-122ºF) to 650ºC (1200ºF)
- Built-in thermostat test
- ºC or ºF programmable
|
| |
| |
| |
| The TC400/650 Industrial Temperature Calibration calibrators generate true reference temperatures using Peltier elements. A specially-engineered temperature controller uses a unique sliding PID algorithm. The response that is generated closely follows the heating curve of an actual thermal system. Thus, stabilization and calibration times are greatly reduced. The light-weight, compact frame and wide temperature range— from –50ºC (-122ºF) to 650ºC (1200ºF)—make the TC400/650 Series Industrial Temperature Calibration calibrators ideal for your high temperature applications. These Industrial Temperature Calibration dry block calibrators are programmable in either Celsius or Fahrenheit and have a two-button operation for easy programming. In addition, optional Windows™-based software can be used with the standard RS-232 interface for fully-automatic calibration. The software is useful for storing extensive documentation required by ISO 9000 such as last calibration date, calibration points, and previous correction valves for specific sensors. |
|
|
